Repair of small holes and cracks in the metal or plastic mesh of the mosquito net
A small hole in the metal mesh can be sealed with a fast-drying waterproof adhesive. For plastic meshes use acetone glue. Another method is to interlace the cavity with a wire pulled out of an unnecessary piece of mesh or a thin copper wire. Try, to make the wire tight, and the distance between individual threads as small as possible.
Patching a larger cavity
1 Cut a piece of mesh from spare material. The patch must be larger than the cavity, with a large supply on each edge. Bend the drawn wires at right angles to the summer.
2 Carefully move the bent wires through the mesh holes surrounding the cavity. When the latka will lie flush with the rest of the surface, bend the wires to the center of Dad, to keep it in place. If the mesh is made of plastic, glue the ends of the fibers.